Atlantic Loft & Luv Coda 38408144 Manual Del Usuario

Publicidad

Enlaces rápidos

Coda Coffee Table
TM
Item#: 38408144
Customer Service:
800-747-2660
Ver. 01 03/14/21

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Atlantic Loft & Luv Coda 38408144

  • Página 1 Coda Coffee Table Item#: 38408144 Customer Service: 800-747-2660 Ver. 01 03/14/21...
  • Página 2: Care Instructions

    Assembly Tips: Become familiar with the instructions and all parts. Make sure that all parts are in the box and in good condition. Assemble the product on the open flat carton or a rug to protect the product and your floor. Some heavy products need a second person to assist in the assembly.
  • Página 3: Parts List/ Lista De Piezas

    Parts List/ Lista de Piezas Tool Needed (not included) Herramanienta requerida (no incluidas) x 12 x 16...
  • Página 4 Screw in cam screws (A) into panel (1) with Phillips screwdriver. With a Phillips screwdriver attach drawer slide (J) to panel (2) and (K) to panel (4) with screws (I), making sure that the roller is positioned near the end of each panel. Atornille los tornillos de leva (A) en el panel (1) con un destornillador Phillips.
  • Página 5 Attach cam screws (A) to back of drawer front panel (12) with a Phillips screwdriver. Attach the drawer front panel (12) by inserting the cam screws (A) into drawer holes. Insert cam locks (B) into drawer sides, turning them clockwise a quarter turn with a Phillips screwdriver to lock. Attach drawer pull (H) into front panel (12) with screw (G) using a Phillips screwdriver.
  • Página 6 Take pre-assembled part from Step 4 and slide panel (3) into the middle channel to the bottom of the pre-assembled part. Tome la pieza premontada del paso 4 y deslice el panel (3) en el canal central hasta el fondo de la pieza premontada. Attach panel (1) to pre-assembled part from step 5 with wood dowels (C) and cam screws from panel (1).
  • Página 7 Flip over pre-assembled part from Step 6 and attach leg brackets (F) to bottom on pre-assembled part with screws (D) using Phillips screwdriver. Attach legs (7) by screwing clockwise. Place pads (O) on bottom of legs. Dé la vuelta a la pieza premontada del paso 6 y fije los soportes de las patas (F) a la parte inferior de la pieza premontada con tornillos (D) con un destornillador de estrella.
  • Página 8: Product Warranty

    Product Warranty Thank you for your Atlantic Inc. purchase. This Limited Warranty covers any defects in material or work- manship for purchases made in the U.S.A and Canada, and excludes claims from conditions, malfunctions or damage not resulting from defects in material or workmanship. The warranty duration is one year.

Tabla de contenido