Eleglide Citycrosser Manual De Usuario página 9

EN
Step 3 Install The Front Brake Caliper
A) Loosen the two screws on the caliper.
B) Insert the caliper into the front brake disc.
C) Slide the two screws through the front fork and caliper, and then tighten the screws.
Step 4 Install The Front Rack and Front Mudguard
A) Loosen the screws on the fork crown and take them out.
B) Place the front rack and the front mudguard in the right position.
C) Slide the screws through the front rack, front mudguard and front fork, and then tighten them.
D) Secure the front rack and mudguard. (There are 2 screws on the fork blades for securing the front
rack and 2 screws on the dropouts for securing the mudguard.)
6