Make sure there is enough batter on the
hotplate. Each whole should be � lled to the
edge.
Do not hold the handle on the upper section
while the donuts cook.
Make sure that the donuts do not stick. Once
the donuts have acquired the desired colour
after 3-5 minutes, remove them from the
hotplate with a utensil made of wood or soft
plastic. Do not use metal utensils, as they can
damage the coating on the hotplate!
Cleaning and maintenance
Unplug the donut maker and allow it to cool
before cleaning it.
Never submerse the donut maker in water.
All external and internal surfaces can be
cleaned with a damp cloth.
Soften any batter stuck to the hotplate using
a little vegetable oil, and then scrape it off
using a utensil made of wood or soft plastic.
Do not use sharp or abrasive objects when
cleaning the donut maker.
16
Service centre
Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
•
Complaints
•
Replacement parts
•
Returns
•
Guarantee issues
•
www.schou.com
Environmental information
Electrical and electronic equipment
(EEE) contains materials,
components and substances that
may be hazardous and harmful to
human health and the environment
if waste electrical and electronic equipment
(WEEE) is not disposed of correctly. Products
marked with a crossed-out wheeled bin are
electrical and electronic equipment. The
crossed-out wheeled bin indicates that waste
electrical and electronic equipment must
not be disposed of with unsorted household
waste, but must be collected separately.
Manufactured in P.R.C.
Manufacturer:
Schou Company A/S
Nordager 31
DK-6000 Kolding
All rights reserved. The content of this manual may not
be reproduced, either in full or in part, in any way by
electronic or mechanical means, e.g. photocopying or
publication, translated or saved in an information storage
and retrieval system without written permission from
Schou Company A/S.