Cleaning The Appliance - SEVERIN RB-7025 Manual De Instrucciones

Cleaning the appliance

Cleaning the drop sensors
In the event of severe contamination, the drop sensors on the bottom of the appliance need to be
8 Cleaning the appliance
cleaned.
1. Make sure that the appliance is switched off and the mains adapter is not connected.
2. Turn the appliance around.
3. Wipe down all three drop sensors with a clean, lint-free cloth (see figure).
Cleaning the round brushes
If the round brushes no longer turn correctly, they need to be cleaned.
1. Make sure that the appliance is switched off and the mains adapter is not connected.
2. Turn the appliance around.
3. Remove the round brushes.
4. Free the round brushes of dirt. If necessary, carefully use tweezers for this.
31