Trouble Shooting - Oster OS-WDBL2200 Manual De Instrucciones

TROUBLE SHOOTING

Water is leaking.
•Unplug dispenser, remove bottle and replace it. No Water is coming from the spout.
•Make sure the bottle is not empty. If empty, replace it.
•Make sure to completely depress the pushbutton controls.
Cold water is not cold.
•It takes up to one hour after setup to dispense cold water.
•Make sure the power cord is properly connected to a working outlet.
•Make sure the back of the dispenser is at least 20cm from a wall and there is free airflow on
all 20cm sides of the dispenser.
•Make sure green power switch on back of dispenser is ON.
•If water still isn't cold, please ask for the service agent for assistance.
Hot water is not hot.
•It takes 15-20 minutes after setup to dispense hot water.
•Make sure the power cord is properly connected to a working outlet.
•Make sure red power switch on back of dispenser is ON.
Nightlight Isn't Working
•Make sure the power cord is properly connected to a working outlet.
•Make sure nightlight power switch on back of dispenser is ON.
Dispenser Is Noisy
•Make sure the dispenser is positioned on a level surface.
English-6