POWER SMITH PWLS150H Manual Del Operario

Luz de trabajo de led, 15000 lúmenes

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

15,000 LUMEN LED WORK LIGHT
PWLS150H
Operator's Manual
TOLL-FREE
888-552-8665
HELP LINE:
WWW.POWERSMITHPRODUCTS.COM
WARNING:
To reduce the risk of injury, user must read and understand
this operator's manual before operating this product.
SAVE THIS MANUAL FOR FUTURE REFERENCE

Publicidad

Tabla de contenido
loading

Resumen de contenidos para POWER SMITH PWLS150H

  • Página 1 15,000 LUMEN LED WORK LIGHT PWLS150H Operator's Manual TOLL-FREE 888-552-8665 HELP LINE: WWW.POWERSMITHPRODUCTS.COM WARNING: To reduce the risk of injury, user must read and understand this operator's manual before operating this product. SAVE THIS MANUAL FOR FUTURE REFERENCE...
  • Página 2: Important Safety Instructions

    Store the work light in a secure place out of the reach of children Inspect it for good working condition prior to storage and before re-use. SAVE THESE INSTRUCTIONS SPECIFICATIONS Model ....... PWLS150H Rated Power ..... 120V~/60Hz, 135W Brightness ......7500 / 15,000 Lumens Color Temperature .... 5000K Bright White CRI ........>80 Cord .........
  • Página 3: Unpacking And Content

    English KNOWING YOUR WORK LIGHT FIG 1 Carrying Handle Locking Knob LEDs Rocker Switch U-Shaped Bracket Power Cord Lens Stand Side Locking Knobs UNPACKING AND CONTENT IMPORTANT Due to modern mass production techniques, it is unlikely the product is faulty or that a part is missing. If you find anything wrong, do not operate the product until the parts have been replaced or the fault has been rectified.
  • Página 4 English ASSEMBLY INSTRUCTIONS ATTACHING WORK LIGHT HEAD TO STAND 1. Place the stand (9) on a flat surface. 2. Position the U-Shaped bracket (3) of the work light head against the stand (9) as shown in FIG 1. 3. Use the locking knob (6), flat washer and spring washer to secure the work light head on the stand. OPERATION ADJUSTING THE LIGHT DIRECTION Your work light can be tilted vertically up to 30°...
  • Página 5: Lampe De Travail Del De 15 000 Lumens

    LAMPE DE TRAVAIL DEL DE 15 000 LUMENS PWLS150H Manuel d’utilisation LIGNE D’ASSISTANCE 888-552-8665 SANS FRAIS: WWW.POWERSMITHPRODUCTS.COM AVERTISSEMENT : Pour réduire le risque de blessure, l’utilisateur doit lire et doit comprendre ce manuel de l’opérateur avant de fonctionner cet produit.
  • Página 6: Instructions De Sécurité Importantes

    état avant de la ranger ou de la réutiliser. CONSERVEZ CES INSTRUCTIONS SPÉCIFICATIONS Modèle ........PWLS150H Puissance nominale ....120 V ~ / 60 Hz, 135 W Luminosité ......7500 / 15 000 Lumens Température de couleur ..5000K, brillant Blanc CRI .........
  • Página 7: Contenu De Carton De Pièces En Vrac

    Français VOTRE LAMPE DE TRAVAIL DEL FIG 1 Poignée de transport Bouton de verrouillage Interrupteur à bascule Support en U Cordon d’alimentation Lentille Pied Bouton de verrouillage latéral OUVERTURE DE L`EMBALLAGE ET CONTENU IMPORTANTE Grâce à des techniques modernes de production de masse, il est peu probable que la produit est défectueux ou qu'une pièce est manquante.
  • Página 8 Français INSTRUCTIONS DE MONTAGE FIXATION DE TÊTE DE LA LAMPE DE TRAVAIL AU PIED 1. Placer le pied (9) sur une surface plane. 2. Placer le support en U (3) de la tête de lampe de travail contre le pied (9), comme illustré à la figure 1. 3.
  • Página 9 LUZ DE TRABAJO DE LED, 15000 LÚMENES PWLS150H Manual del Operario LÍNEA DE AYUDA 888-552-8665 GRATUITA: WWW.POWERSMITHPRODUCTS.COM ADVERTENCIA: Para reducir el riesgo de la herida, el usuario debe leer y deber comprender el manual de este operario antes de operar este instrumento.
  • Página 10: Instrucciones Importantes De Seguridad

    GUARDE ESTAS INSTRUCCIONES ESPECIFICACIONES Modelo ........PWLS150H Potencia nominal ....120V~/60Hz, 135W Brillo ........7500 / 15000 lúmenes Temperatura de color ..... 5000K, Blanco Brillante CRI .........
  • Página 11 Español SU LUZ DE TRABAJ DE LED FIG 1 Asa de transporte Perilla de traba LEDs Interruptore de balancín Soporte en forma de U Cordón de alimentación Lente Pedestal Perilla de traba lateral DESEMPAQUETADO Y CONTENIDO ¡IMPORTANTE! Debido a las modernas técnicas de producción en masa, es poco probable que la producto está...
  • Página 12: Utilización

    Español INSTRUCCIONES DE MONTAJE CONEXIÓN DE LA CABEZA DE LA LUZ DE TRABAJO EN EL PEDESTAL 1. Coloque el pedestal (9) sobre una superficie plana. 2. Coloque el soporte en forma de U (3) de la cabeza de la luz del trabajo contra el pedestal (9), como se muestra en la figura 1.
  • Página 13 NOTES...
  • Página 14 NOTES...
  • Página 15 NOTES...
  • Página 16 Richpower Industries, Inc. 736 Hampton Road Williamston, SC USA www.richpowerinc.com 2021.5 V01...

Tabla de contenido