Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

30,000 LUMEN DUAL-HEAD
PWLD300T
LED WORK LIGHT WITH TRIPOD
Operator's Manual
888-552-8665
TOLL-FREE
HELP LINE:
WWW.POWERSMITHPRODUCTS.COM
WARNING:
To reduce the risk of injury, user must read and understand
this operator's manual before operating this product.
SAVE THIS MANUAL FOR FUTURE REFERENCE

Publicidad

Tabla de contenido
loading

Resumen de contenidos para POWER SMITH PWLD300T

  • Página 1 30,000 LUMEN DUAL-HEAD PWLD300T LED WORK LIGHT WITH TRIPOD Operator's Manual 888-552-8665 TOLL-FREE HELP LINE: WWW.POWERSMITHPRODUCTS.COM WARNING: To reduce the risk of injury, user must read and understand this operator's manual before operating this product. SAVE THIS MANUAL FOR FUTURE REFERENCE...
  • Página 2: Important Safety Instructions

    • Store the work light in a secure place out of the reach of children. Inspect it for good working condition prior to storage and before re-use. SAVE THESE INSTRUCTIONS SPECIFICATIONS Model ......... PWLD300T Rated Power ....... 120V~/60Hz, 270W Brightness ......7500 / 15,000 / 22,500 / 30,000 Lumens Color Temperature ....5000K Bright White CRI ........
  • Página 3: Unpacking And Content

    English KNOWING YOUR WORK LIGHT Carrying Handle Work Light Heads Lens Side Locking Knobs Rocker Switches Power Cord Stand Tripod FIG 1 UNPACKING AND CONTENT IMPORTANT Due to modern mass production techniques, it is unlikely the product is faulty or that a part is missing. If you find anything wrong, do not operate the product until the parts have been replaced or the fault has been rectified.
  • Página 4 English ASSEMBLY INSTRUCTIONS SET UP AND ADJUST THE TRIPOD (FIG 2) 1. Loosen the tripod locking knob (F). 2. Push down the leg connector (A) until the legs (B) are fully extended and firmly tighten the locking knob (F). 3. Adjust the height of the tripod by unlocking the flip locks (C1 & C2) and raising the center poles (D1 &...
  • Página 5 English OPERATION ADJUSTING THE LIGHT DIRECTION Each of the work light heads can be tilted vertically up to 30° down or 90° up. To Adjust the Light Direction, loosen the side locking knob (4-FIG 1). Adjust the work light head to the desired position, and retighten the knob.
  • Página 6 LAMPE DE TRAVAIL DEL DOUBLE PWLD300T DE 30 000 LUMENS AVEC TRÉPIED Manuel d’utilisation LIGNE D’ASSISTANCE 888-552-8665 SANS FRAIS: WWW.POWERSMITHPRODUCTS.COM AVERTISSEMENT : Pour réduire le risque de blessure, l’utilisateur doit lire et doit comprendre ce manuel de l’opérateur avant de fonctionner cet produit.
  • Página 7: Instructions De Sécurité Importantes

    état avant de la ranger ou de la réutiliser. CONSERVEZ CES INSTRUCTIONS SPÉCIFICATIONS Modèle ........PWLD300T Puissance nominale ....120 V~ / 60 Hz, 270 W Luminosité ......... 5000 / 10 0000 / 15 000 / 20 000 Lumens Température de couleur .....
  • Página 8: Tabla De Contenido

    Français VOTRE LAMPE DE TRAVAIL DEL Poignée de transport Têtes de la lampe de travail Lentille Bouton de verrouillage latéral Interrupteurs à bascule Cordon d’alimentation Pied Tripode FIG 1 OUVERTURE DE L`EMBALLAGE ET CONTENU IMPORTANTE Grâce à des techniques modernes de production de masse, il est peu probable que la produit est défectueux ou qu'une pièce est manquante.
  • Página 9: Fixation De La Lampe De Travail Au Tripode (Fig. 2, 4)

    Français INSTRUCTIONS DE MONTAGE RÉGLAGE DU TRIPODE (FIG. 2) 1. Desserrer le bouton de verrouillage du tripode (F). 2. Enfoncer le connecteur des pattes (A) jusqu’à ce qu’elles soient (B) complètement allongées, puis resserrer fermement le bouton de verrouillage (F). 3.
  • Página 10: Fig 5

    Français FONCTIONNEMENT RÉGLAGE DE LA DIRECTION DU FAISCEAU LUMINEUX Chacune des têtes de la lampe de travail peut être basculée à la verticale jusqu’à un angle de 30 degrés vers le bas ou de 90 degrés vers le haut. Pour régler la direction du faisceau lumineux, desserrer le bouton de verrouillage latéral (4-FIG 1).
  • Página 11 LUZ DE TRABAJO DE LED, DOBLE CABEZAL DE PWLD300T 30000 LÚMENES, CON TRÍPODE Manual del Operario LÍNEA DE AYUDA 888-552-8665 GRATUITA: WWW.POWERSMITHPRODUCTS.COM ADVERTENCIA: Para reducir el riesgo de la herida, el usuario debe leer y deber comprender el manual de este operario antes de operar este instrumento.
  • Página 12: Instrucciones Importantes De Seguridad

    GUARDE ESTAS INSTRUCCIONES ESPECIFICACIONES Modelo ....... PWLD300T Potencia nominal ....120V~/60Hz, 270W Brillo ........7500 / 15000 / 22500 / 30000 lúmenes Temperatura de color ..
  • Página 13: Tripode

    Español SU LUZ DE TRABAJO DE LED Asa de transporte Cabezas de luces de trabajo Lente Perilla de traba lateral Interruptores de balancín Cordón de alimentación Pedestal Trípode FIG 1 DESEMPAQUETADO Y CONTENIDO ¡IMPORTANTE! Debido a las modernas técnicas de producción en masa, es poco probable que la producto está...
  • Página 14: Conexión De Las Cabezas De Las Luces De Trabajo En El Pedestal

    Español INSTRUCCIONES DE MONTAJE AJUSTE DEL TRÍPODE (FIG 2) 1. Afloje la perilla de traba del trípode (F). 2. Empuje hacia abajo el conector de la pata (A) hasta que las patas (B) estén completamente desplegadas y apriete firmemente la perilla de traba (F).
  • Página 15: Utilización

    Español TILIZACIÓN AJUSTE DEL SENTIDO DE LA LUZ Cada una de las cabezas de las luces de trabajo puede inclinarse verticalmente hasta 30° hacia abajo o 90° hacia arriba. Para ajustar el sentido de la luz, afloje la perilla de traba lateral (4-FIG 1). Ajuste la cabeza de la luz de trabajo a la posición deseada y vuelva a apretar la perilla.
  • Página 16 Richpower Industries, Inc. 736 Hampton Road Williamston, SC USA www.richpowerinc.com 2021.05 V01...

Tabla de contenido