DeLOCK 87772 Manual Del Usuario página 4

English
Operation
1.
Connect the USB-C™ cable to the docking station and to the computer or
mobile device.
Note: A free USB Type-C™ port with DisplayPort alternate mode or with a
Thunderbolt™ 3 port is required.
2.
Connect USB devices to the USB 3.0 Type-A ports or the USB-C™ port.
3.
Connect up to three monitors (1 x HDMI and 2 x DisplayPort) to the docking
station.
Note: Three ports can work simultaneously.
Under Windows, only one display can be duplicated to the main screen, the
other displays can either be expanded or duplicated with each other as an
extension to the main screen.
4.
Use an Ethernet cable to connect the Gigabit Ethernet port to a network.
5. Connect the included power supply to the DC female port.
6. Connect a power supply to the USB Type-C™ charging port, to charge your
laptop or mobile device during operation.
Simultaneous use of two power supply units on the docking station is
possible.
7.
Connect headphones or a headset to the stereo port.
8. Insert an SD card into the card reader.
9. Insert an Micro SD card into the card reader.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 08/2022
-4-