Publicidad
Idiomas disponibles
Idiomas disponibles
Plug into charging cable, LED display show 88:88, then display the
time.
Long press⑦ for 3 seconds, reset clock time into 6:00 am, alarm
time into 00:00 am, short press⑦ to turn on/off the time display.
Setting the clock:
1. Short press⑤ to set the hour, short press⑤ to switch the
minute setting, and long press⑤ to exit the time setting;
2. Short press⑥ to increase hours/ minutes;
3. Short press④ to decrease hours/ minutes;
Time needs to be reset every time when you connect the wireless
charger to power on.
Setting the alarm clock:
1. Short press④ to set hours, short press⑤ to switch minutes
setting, long press⑤ to exit setting;
2. Long press④, turn on/ off alarm display (Only one set of alarm
time can be set);
3. Set 12h/24h time mode: When displaying the time, follow the
steps below, short press⑥ 12/24 hour system switch;
4. When the alarm ringing, tap the device/press any button to stop
the alarm (the alarm will ring for 30 seconds, with an interval of
10 seconds, and then ring again for 30 seconds), and the cycle
will continue. If there is no tapping after 10 minutes, the alarm
will stop automatically, and the alarm will resume the next day.
Publicidad
