Functional Description; Removing/Inserting The Battery - Milwaukee M18 2817-20 Manual Del Operador

FUNCTIONAL DESCRIPTION

7
6
5
4
3
1. Handle
2. Wheel
3. Front drum mount
4. Cable Drive
TM
assembly attachment
holes
5. Drum
6. Forward/Reverse
controls
7. Folding mechanism
8. Foot pedal
9. Wheel shaft
10. Drum plug
11. Foot pedal
connection
11
12. Tensioner
9
8
12
10
Volts
1
Direct Current
No Load Revolutions per Minute (RPM)
Read operator's manual.
Always wear leather gloves over
latex/rubber gloves.
Always wear eye protection.
Use appropriate hearing and
respiratory protection.
o
Forward/OFF/Reverse drum control
Do not allow battery to contact corrosive
or conductive fluid
UL Listing for Canada and U.S.
C US
Cat. No. ..........................................................2817-20
Volts ...................................................................18 DC
No Load RPM ........................................................300
2
Battery Type ..................................................... M18™
Charger Type .................................................... M18™
Cable Range................................................ 3/8" - 1/2"
Weight (without cable) ................................36.5 lbs
Recommended Ambient
Operating Temperature ......................0°F to 125°F
Drum Cat. No............................................ 47-53-2817
Pedal Cat. No ........................................... 14-02-0000
WARNING
cific charging instructions, read the operator's
manual supplied with your charger and battery.

Removing/Inserting the Battery

To remove the battery, push the battery latch to the
side and squeeze the battery latch lever. Pull the
battery pack away from the machine.
WARNING
To insert the battery, slide the pack into the body of
the machine. Make sure it latches securely into place.
4
SYMBOLOGY
SPECIFICATIONS
ASSEMBLY
Recharge only with the charger
specified for the battery. For spe-
Always remove the battery pack
any time the tool is not in use.