Cooking
Specific information to read before using the
robot to COOK:
•
Do not use the
in the reservoir.
•
The blades must be fixed in place during cooking.
•
During cooking, the lid must always be properly fitted.
•
After cooking:
Do not touch the water reservoir until it has cooled down.
When handling the preparation jug assembly it must always be done very carefully as it will
be very hot (always grasp it by its handle).
•
It is recommended to clean the accessories with clean water and dry with a dry cloth after
each use (do not clean the base with water, only use a cloth).
How to use:
•
Fill the preparation jug with the sufficient amount of water and pour that water into the reservoir
(water always at room temperature).
•
Cut the food into cubes and place it in the cooking basket.
•
Set the cooking basket (with the food inside) resting it inside the preparation jug.
•
Cover the basket and jug with the lid (Ensure the lid is locked into the closed position to
prevent injuries).
•
Place the jug assembly (basket + jug + lid) onto the base, and turning it clockwise until it
is locked.
•
Plug in the cord into the wall power socket and turn on the On/Off switch. If the assembly has
been properly locked, the 3 pictograms (steam, blend, vacuum sealing) will light up in green.
Otherwise, for safety reasons, the robot will not work until it has been fixed firmly in place).
86
Pantone 1805
Pantone 423
to cook without any water