ALFA babycare bbrobot Manual De Instrucciones página 88

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
Plug in the cord into the wall power socket and turn on the On/Off switch. If the assembly has
been properly locked, the 3 pictograms (steam, blend, vacuum sealing) will light up in green.
Otherwise, for safety reasons, the robot will not work until it has been fixed firmly into place once again).
Press the STEAM symbol (the symbol will illuminate with a blue flashing light, indicating that the end
of the vacuum suction tube must quickly be attached to the connection area of the container's lid.
Warning! If the vacuum packaging button is pressed again while the pump is in ope-
ration, the process will be cancelled automatically.
Once the vacuum sealing has been completed, the 3 pictograms (steam, blend, vacuum
sealing) will automatically light up in green, indicating that any function is ready to be used.
Warning! The system will automatically switch off for safety reasons if the nozzle is
connected to the recipient or the pipe to the vacuum is not closed within an estimated
waiting time of 30 seconds.
Return the vacuum suction tube to its slot in the base
of the bbrobot.
Once the vacuum sealing in the container has finished,
move the clip on the lid to the left to prevent the possible
inlet of air or outlet of liquids (see picture).
To open the container once it has been vacuum packed,
move the clip on the lid to the right, pressing downwards
and unscrewing the lid (see picture).
It is recommended to always unplug the appliance before
cleaning it or when it is not being used.
Other vacuum packaging jars with a standard nozzle can be used.
88

Publicidad

Tabla de contenido
loading

Productos relacionados para ALFA babycare bbrobot

Tabla de contenido