MSW -OD-68 Manual De Instrucciones página 29

3.2. Preparation for work
LOCATION OF THE DEVICE
The ambient temperature should not exceed 45°C and the relative humidity should
not exceed 85%. Use the device only in well-ventilated places. Do not block the air
outlet of the device. Keep the device away from any hot surfaces. Always operate
the device on a level, stable, clean, fireproof and dry surface and out of the reach of
children and persons with reduced mental, sensory and intellectual abilities. The
working area should have immediate access to the compressed air shut-off valve.
Ensure that the pressure of the air supplying the device does not exceed the
recommended range.
3.3. Assembly of the device
1. Screw the drain pipe with vale to the funnel bowl. It is recommended to wrap the
thread with a teflon tape to seal the connection. Place the lower portion of the drain
pipe into the drain tank. Secure its location by tightening it with the clamping screw.
2. Install hoses:
a) suction hose (downstream of the pressure gauge):