Search Menus - Samsung SCR-3000N Manual De Instrucciones

DIGITAL VIDEO RECORDER
1

Search Menus

Entering the DVR SEARCH MENU
To search the recorded data, press the SEARCH (
should appear.
SEARCH MENU
DATE & TIME SEARCH
RECORD EVENT SEARCH
ALARM EVENT SEARCH
MOTION EVENT SEARCH
PB CHANNEL SETUP
SYSTEM INDICATION
MOVE=[ /
Note Note
- If the system is in Live Screen mode, Record mode, or Play mode, you can search
all recorded data.
- If you search the recorded data during playback, the newly searched data will be
played regardless of which data was playing previously.
- While you are in a menu, you cannot go into the SEARCH MENU by pressing the
SEARCH
SEARCH ( ) button. To go into the SEARCH MENU, exit the menu you are cur-
rently in.
Selecting a Menu Item
Use the UP( ) or DOWN( ❷ ) buttons to move to the menu item you want.
A highlighted cursor should appear over the selected item. Next, press the ENTER (
button to accept the choice. In submenus, you can set the criteria for your data search or
select and play back an item from the list of recorded data.
Setting the Search Criteria & Selecting an Item from the List
In the DATA & TIME SEARCH menu, set the search criteria. In the RECORD EVENT
SEARCH and ALARM EVENT SEARCH, MOTION EVENT SEARCH menus, select one
from the list of recorded data. Methods of setting the search criteria and selecting an item
from the list are the same as in other menus.
7-1
All manuals and user guides at all-guides.com
SEARCH
) button. Then the following screen
❷ ] SELECT=[ ] EXIT=[SEARCH]
)
Returning to the Upper Menu or Exit the Current Menu
SEARCH
Press the SEARCH ( ) button to exit the current menu level or to return to the upper menu.
Menu Items
DATE & TIME SEARCH
DATE & TIME SEARCH
DATE&TIME 2003-07-10 13:37:48
[SEARCH START]
➛ ❿
MOVE=[ / ❷ / / ] SELECT=[ ] EXIT=[SEARCH]
ALARM EVENT SEARCH
ALARM EVENT SEARCH [01/03]
ID EVENT DATE TIME
01 ALARM START 2003-07-13 17:25:52
02 ALARM START 2003-07-12 06:37:38
03 ALARM START 2003-07-11 11:54:34
MOVE=[ / ❷ ➛ ❿ ] SELECT=[ ] EXIT=[SEARCH]
PB CHANNEL SETUP
PB CHANNEL SETUP
CH 1 : ON CH 5 : ON CH 9 : ON CH13 : ON
CH 2 : ON CH 6 : ON CH10 : ON CH14 : ON
CH 3 : ON CH 7 : ON CH11 : ON CH15 : ON
CH 4 : ON CH 8 : ON CH12 : ON CH16 : ON
MOVE=[ / ❷ / ➛ / ❿ ] SELECT=[ ] EXIT=[SEARCH]
Caution
Caution
- No list will be displayed when you go into the RECORD EVENT SEARCH or
ALARM EVENT SEARCH, MOTION EVENT SEARCH menu, or the POWER EVENT
LIST screen because no data is recorded on the hard drive when it is first shipped
from the factory.
RECORD EVENT SEARCH
RECORD EVENT SEARCH [1/7]
ID EVENT DATE TIME
01 RECORD START 2003-07-13 09:23:55
02 RECORD START 2003-07-12 13:43:21
03 RECORD START 2003-07-12 11:13:42
04 RECORD START 2003-07-11 09:23:55
05 RECORD START 2003-07-11 05:11:42
06 RECORD START 2003-07-10 23:51:12
07 RECORD START 2003-07-10 13:37:48
MOVE=[ / ] SELECT=[ ] EXIT=[SEARCH]
❷ ➛ ❿
MOTION EVENT SEARCH
MOTION EVENT SEARCH [01/03]
ID EVENT DATE TIME
01 MOTION START 2003-07-13 22:42:16
02 MOTION START 2003-07-12 14:24:45
03 MOTION START 2003-07-11 06:13:52
MOVE=[ / ❷ ➛ ❿ ] SELECT=[ ] EXIT=[SEARCH]
SYSTEM INDICATON
SYSTEM INDICATION
POWER EVENT LIST
SYSTEM INFORMATION
SYSTEM STATUS
MOVE=[ / ❷ ] SELECT=[ ] EXIT=[SEARCH]
7-2