Magerit METRO Manual De Instrucciones página 14

SEQUENCER menu
In this menu you will create different rhythmic patterns for each channel. As there are 6 channels (or
slots), you will find 6 patterns completely independent of each other. However, they all share the same
TEMPO in BPM.
Magerit METRO has two types of sequencers: a Step sequencer and a Euclidean sequencer. We will see
how each one works. To toggle between the two types of sequencers, press and hold
than 3 seconds. The "SEQ→STEP" or "SEQ→EUCLID" will flash on the display.
To save changes (sequencer type, tempo, parameters...), press and hold
seconds. Otherwise, the sequencer kind will change and nothing will be saved.
Make a short press on
button won't work.
The TRIG button resynchronizes all the ratios of the sequences between them. Press and hold TRIG to reset
all sequences.
The external clock sync mode plays the sequences at the rate set by any clock signal from any other Eurorack
module. If you pause that clock source, METRO will detect it and pause the sequencer. If you also pause your
clock generator for more than 2 seconds, once you play again it, all sequences will be reseted.
- STEP SEQUENCER
Grids of adjustable length and selectable steps. On each channel you can select a different sequence
length, pattern or ratio.
Turn the encoder to scroll
horizontally. Press and hold
while turning the encoder to
move vertically.
Press the encoder to turn on or
off the specific step (where the
cursor is).
button to play or pause all sequences. If an external clock is connected, this
Current channel playback
position
v
÷1: 120
Cursor - Encoder position
1
2
1
2
2/24 1:2
4
3
button for more
button, but no longer than 3
The pause symbol indicates that its
sequence is paused.
If you find a play symbol on the
bottom side of the screen, that
means that an external clock is
connected. A pause symbol says that
the whole sequencer is paused.
Potentiometers:
1 - TEMPO (BPM)
2 - Number of steps of the selected
sequence
3 - Ratio of the selected pattern
4.- ON/OFF, activate or deactivate
sequence
14