Start Up; Turning On And Off; Dry Vacuuming - Truper ASP-04 Manual

Assembly
• Insert the hose into the vacuum port (F).
• If necessary, connect one or more extension tubes to the
free end of the hose.
• Choose the appropriate nozzle and connect it to the free
end of the hose or if necessary to the extension tube (G).
F

Start Up

Turning ON and OFF

• To turn the vacuum cleaner on, plug the power cord into
the electrical outlet.
• Install the switch (F) in the "I" (ON) position.
• To turn the vacuum cleaner off, install the switch in the
off position "O" (OFF), and disconnect the power cord
from the outlet.
CAUTION
• Always verify that the switch is in the off
position before connecting the power cord to the outlet.

Dry vacuuming

• Open the vacuum as instructed on page 6 to verify that
the dry vacuum cloth filter is properly installed.
• If not, hold the motor cover by the handle and install the
filter in the filter cage (H) as shown. Then install the motor
cover in place.
• Do not vacuum or work near toxic,
WARNING
flammable or explosive materials as indicated in the safety
warnings on page 5.
CAUTION • For dry vacuuming do not use the foam
filter that is for liquid vacuuming.
• When you finish the vacuuming work, empty the
container before storing the vacuum cleaner.
Switch
H
G
7
ENGLISH