Midwest Feline Nuvo Tower Manual De Instrucciones página 4

8.
Place the Top Platform (P) over the Dual Threaded Screw
so it rests on the two Sisal Wrapped Tubes below.
9. Use the Long Hardware Screw with Plastic Cap (O) to
secure the left side of the Top Platform to the
Sisal-Wrapped Tube. Use the Allen Wrench (U) to tighten.
Insert the SHORT threads of the Dual Threaded Screw (S)
10.
into the bottom of the Circular Bolstered Perch (T). Then,
screw the Sisal-Wrapped Tube (R) on to the Circular
Bolstered Perch. The LONG threads will go down into the
tube.
11. Attach the Tube with Perch onto the Dual Threaded Screw
on the right of the Top Platform. Turn clockwise until fully
tightened.
IMPORTANT NOTE:
The SHORT threads go
up into the platform.