Preparation For Operation - Fromm & Starck STAR DESK 21 Manual De Instrucciones

S-H Cable clamp
S-I Allen key 4mm
S-J Allen key 8mm
3.2.

Preparation for operation

POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 85%. Place the unit in a way that ensures good air circulation. Keep the
unit away from any hot surfaces. Always operate the unit on a level, stable, clean,
fireproof and dry surface and out of the reach of children and persons of impaired
mental, sensory and intellectual functions. Place the unit in such a way that the
mains plug can be reached at any time. Ensure that the power supply to the unit
corresponds to that specified on the identification plate!
ASSEMBLY OF THE UNIT
Useful tools during installation (not included):
- level
- screwdriver
- Phillips screwdriver
STEP 1: Attaching the motor to the lifting column
• Insert the right end of the connecting rod (A) into the hexagonal motor
mounting hole (B).
• Insert the left end of the connecting rod into the hexagonal mounting hole of
the lifting column (C).
Caution: If the lifting column mounting hole does not match the dimension of the
connecting rod, carefully adjust the mounting hole with an 8 mm Allen key (S-J) so
that the pieces fit together.
• Attach the motor to the lifting column with 2 screws (S-B) from the side and 2
screws (S-B) from the bottom of the column using a Phillips screwdriver.