BGS technic 8501 Instrucciones De Uso página 5

USE
1. Link the new timing chain to the old timing chain (4) using the mounting link consisting of chain
joint (6), plate (7) and clasp (8).
2. Remove the fixing bolts.
3.
Rotate the crankshaft slowly in direction of rotation of the engine
4. Pull the end of the old timing chain that comes free evenly out of the timing chain box to the
same extent as the new timing chain is getting pulled inside. Note: make sure that the timing
chain does not skip while it is being rotated.
5. Take off the old timing chain.
6. Connect the ends of the new timing chain with the riveting link (9) and centre plate (if installed).
7. Place a suitable guiding tool into the holder and fix it with the
screw.
8. Insert the movable pressure pad for the outer plate into the
riveting tool.
9. Insert the outer plate into the pressure pad.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
.
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed