Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
if required, to the item to be inflated, making sure that
the lever of the valve adaptor is in the down position to
lock it in place.
5. To start the inflator press the mode power switch (2),
towards the side of the tire symbol.
6. When the item to be inflated has reached the preset
value the unit will automatically turn off.
Note: You may notice the actual pressure reading
may drop after a couple of seconds. This is normal.
7. To stop the inflator at any time, press the main power
button back to the center position.
Note: If the AC/DC power switch is turned off, all settings
will be lost and will need to be reentered. This is a safety
feature to prevent the risk of items OVER INFLATING.
USING THE INFLATOR AS A PRESSURE GAUGE
Connect the universal valve adaptor (9) to the item to
1
be checked.
2. Press the mode power switch (2), on the side of the
tire symbol.
3. The LCD will display the item's pressure.
4. After checking, press the mode power switch (2) back
to the center position and return the air hose to the
storage location.
MAINTENANCE
Use only a dry cloth to clean the tool. Never let any liquid get
inside the tool; never immerse any part of the tool into a liquid.
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning. Your charger does not
require any maintenance apart from regular cleaning.
Warning! Before performing any maintenance on the
tool, remove the battery from the tool. Unplug the charger
before cleaning it.
f Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
f Regularly clean the motor housing using a damp
cloth. Do not use any abrasive or solvent-based cleaner.
f Regularly open the chuck and tap it to remove any
dust from the interior.
¡Important! To ensure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(other than those listed in this manual) should be performed
by authorized service centers or other qualified organizations,
always using identical replacement parts. Unit contains no
user service able parts inside.
ACCESSORIES
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
Warning! The use of any accessory not recommended
for use with this tool could be hazardous.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
BATTERIES
BLACK+DECKER batteries can be recharged
many times. At the end of their useful life, discard
batteries with due care for our environment:
f Run the battery down completely, then remove it from
the tool.
f NiCd, NiMH and Li-Ion batteries are recyclable.
Take them to any authorized repair agent or a local
recycling station.
TECHNICAL DATA
MULTI-PURPOSE
INFLATOR
Maximum
PSI
pressure
AC POWER
CORD
TYPE
Voltage
Frequency
Hz
VEHICLE
CONNECTOR
BATTERY
Voltage
* Maximum initial battery pack voltage (Measured without
a workload) is 20 volts. Measured under a workload,
nominal voltage is 18V.
Warning!
This device shouldn't be use by persons (including children)
whose have a physical capacity, sensory, mental abilities different or reduced,
or person without experience or knowledge unless they can receive supervision
or training to operation the device by someone responsible for your safety.
ENGLISH • 33
BDINF20
160
-AR -B2C -B3
V
220 220 120
50
50
60
V
12 DC
LD120BAT
V
20 V
MAX*
-B2 -BR
220 127
60
60
Publicidad
Tabla de contenido
