Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR USE
•
Install the blades (4) on the base. Next, install the jug (3) on the base
and then turn it gently until it is properly screwed onto the motor base.
•
Insert the food into the jar; the content must not exceed the maximum
level indicated on the jar.
•
Place the lid (2) on the jar (3) and make sure it is installed correctly.
•
Plug the power cord into an outlet and then press the ON / OFF button
to the '0' position.
•
Once you have finished using the blender, wait a few minutes until the
engine stops operating, then remove the jug.
•
To remove the cover, turn it in the opposite direction to the one
installed.
IMPORTANT NOTE
•
The maximum capacity of the jug is 1.5 liters. Do not exceed the
indicated capacity (when using liquids, not add more than 1.25 liters)
- should not be placed too hot ingredients into the jug (more than 80).
•
Remove the jar once the engine has completely stopped.
•
When processing frozen fruit, take particular care to ensure that the
fruit is always in small pieces before blending.
•
Do not run the appliance for longer than 1 minute at a time. Allow it
to cool down to room temperature before operating it again.
•
Do not operate the blender when empty.
CLEANING
•
To switch the appliance off, turn the speed selector to the "0" position
and disconnect the power cord from the outlet.
•
Before cleaning the blender, always make sure that the plug is
disconnected and allow the appliance to completely cool down
before you clean it or put it away! Danger of electric shock!
Publicidad
Tabla de contenido
