Dacor DHD U790LS/DA Serie Guia De Usos Y Cuidados página 9

Care and Maintenance
Filters and drip trays
1. Use 2 hands to remove filters. Grasp filter handles, pull
toward the front of the hood and pull down on the rear
handle to remove. Repeat for each filter.
*Model shown for reference only, some features may vary
2. Untighten and remove drip tray screws and uninstall drip trays.
3. Wash filters and drip trays as needed in dishwasher or hot detergent solution to clean.
4. Place drip tray in its original positon, replace and tighten drip tray screws.
5. Reinstall filters by grasping filter handles and place front edge of filter into the hood.
6. Push up on the back handle and set rear of filter into the
drip tray to secure. Repeat for each filter.
Replacing strip LED
The strip LED is replaceable by a service technician only. See the support contact information in the Warranty section.
1
A. Drip trays
B. Drip tray screws
1
2
2
ENGLISH 9