Technical Specifications - Torin BIG RED T26801 Manual Del Propietário

SAFETY MARKINGS
WARNING!
1. Study, understand, and follow all instructions before operating this device.
2. Do not exceed rated capacity.
3. Use only on hard, level surfaces, with less than 3 degrees of slope.
4. Center load on mounting plate.
5. Mount and support only on areas of the engine as specified by the vehicle manufacturer.
6. Lock mounting plate rotating mechanism before applying a load.
7. Lock the wheels/casters before working on the engine.
8. Rotate the engine using the handle or device provided.
9. Assure load is centered and secured to mounting attachments.
10. Off-center loads may make the load and handle rotate in either direction when the rotational locking
device is released.
11. Release rotational locking devices slowly and carefully.
12. No alterations shall be made to this product.
13. Only attachments and/or adapters supplied by the manufacturer shall be used.
14. Never work directly under a supported load.
15. Do not use this product for any use other than the manufacturer specified usage.
16. Failure to heed these markings may result in personal injury and/or property damage.

TECHNICAL SPECIFICATIONS

Item
Capacity
ASSEMBLY
Use the exploded drawing as your guide to assembly. Lay all parts and assemblies out in front of you before
beginning. The following procedure is recommended:
All numbers in parenthesis () refer to the index number from the parts breakdown.
1. Familiarize yourself with Engine Stand.
2. Remove the cap (14) from the rear support beam
(13), Attach wheel (16) to real support beam (13)
with bolt (18), spring washer (17) and nut (15).
put the cap (14)to the real support beam (13).
All manuals and user guides at all-guides.com
Description
T26801
1,500 lbs.
3. Attach caster (21) to main post (10) with washer
(5), spring washer (6) and nut (7)
2