Torin BIG RED T26801 Manual Del Propietário página 3

4. Attach main post (10) to the rear support beam
(13) with bolt (11) (19), washer (5), spring washer
(6) and nut (7).
6. Attach fortable beam (26) to the front leg (27)
with bolt (11) (19), washer (5), spring washer (6)
and nut (7).
All manuals and user guides at all-guides.com
5. Remove the cap (14) from the front leg (27),
Attach caster (28) to front leg (27) with washer (5)
spring washer (6) and nut (7), put the cap (14) to
the front leg (27).
7. Fasten the main post (10) , fortable beam (26)
with bolt (12) , washer (22) spring washer (23)
and nut (24) ,Lift one side of the main post (10)
to align the hole on the frame to the hole on the
fortable beam (26) , then insert the position pin
(25) into the hole , and insert the Roundwire
snap ring (20) into the hole of the Pin.
3