Xtech XTS-450 Guía De Instalación Rápida página 5

Technical specifications
Maximum power output (RMS) 80W total
AC input 110/220V 60/50Hz (with voltage selector)
Driver unit: 5.25in
Maximum power output (RMS): 30W
Subwoofer Frequency: 20Hz-170Hz
Impedance: 8
Sensitivity: 600mV
Signal to noise ratio: ≥40dB
Driver unit: 3in each
Maximum power output (RMS): 10W each (50W total)
Satellite Frequency: 120Hz-20kHz
Impedance: 4
Sensitivity: 600mV
Signal to noise ratio: ≥40dB
Input type DVD, 3.5mm, USB and SD™ card, memory ports
Memory card slot SD™
Wireless range 33ft
Dimensions Subwoofer: 6.6x12.2x13.2in
Satellite: 4.1x6.7x4.4in
Weight Subwoofer: 11.3lb
Satellite: 1.1lb each (5.6lb total)
Cable length 3.6ft RCA to 3.5mm cable
3.6ft RCA to RCA cable
Warranty One year
Precautions
• Do NOT drop, hit or shake the device.
• Do NOT disassemble, repair or modify the portable speaker yourself.
• Do NOT use cleaning products that contain benzene, solvents or alcohol.
• Do NOT expose the speaker to excessive heat or to direct sunlight for long periods of time.
• Do NOT place heavy objects on top of the portable speaker.
• Do NOT use near a microwave oven or wireless LAN products.
FCC statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct the interfe-
rence by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit di erent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Guía de instalación rápida
I. Introducción
Felicitaciones por la compra de su nuevo sistema de parlantes de 5.1 canales XTS-450 de
Xtech® con tecnología inalámbrica.
Lo invitamos a visitar nuestra página web en
asistencia o si desea conocer más acerca de este sistema de audio y otros innovadores
productos.
Contenido del empaque:
• Parlante de graves
• Parlante satélite
• Control remoto
• Cable con conector RCA a estéreo de 3,5mm
• Cable con conector RCA a RCA
• Pila tipo AAA
• Guía de instalación rápida
II. Descripción del producto
Panel frontal
4
5
www.xtechamericas.com en caso de solicitar
(1)
(5)
(1)
(1)
(1)
(2)
(1)
8
6
1
7
2
3