Safety; Proper Use; Intended Use - Fronius MTB 200i G ML/L268/flex Manual

Safety

Proper use

The MIG/MAG manual welding torch is intended solely for MIG/MAG welding in manual
applications.
Any use above and beyond this purpose is deemed improper. The manufacturer shall not
be held liable for any damage arising from such usage.
Proper use includes:
-
-

Intended use

The MIG/MAG manual welding torches described are intended exclusively for MIG/MAG
welding in manual applications.
The automatic MIG/MAG welding torches described are intended exclusively for
MIG/MAG welding in automated applications.
Any other use or use beyond this is considered improper. The manufacturer shall not be
liable for any damage resulting from such use.
Proper use also includes:
-
-
Safety
Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
▶
▶
▶
Danger from electric current and risk of injury from the emerging wire electrode.
This can result in serious injury and damage to property.
▶
▶
▶
Danger from electric current.
This can result in serious injury and damage to property.
▶
32
Carefully reading and following all the instructions given in the operating instructions
Performing all stipulated inspection and maintenance work.
Following all the instructions contained in the Operating Instructions
Performing all stipulated inspection and servicing work
WARNING!
All the work and functions described in this document must only be carried out by
trained and qualified personnel.
Read and understand this document.
Read and understand all the Operating Instructions for the system components,
especially the safety rules.
WARNING!
Turn the power source mains switch to the "O" position.
Disconnect the power source from the mains.
Ensure that the power source remains disconnected from the mains until all work
has been completed.
WARNING!
All cables, lines and hosepacks must be properly connected, undamaged, correctly
insulated and adequately dimensioned at all times.