Maintenance - Tineco PURE ONE X Serie Manual De Uso

Maintenance

Note:
• Clean the dustbin and filters after each use.
• Use the cleaning tool to thoroughly clean the pre-filter when the indicator blinking red rapidly. To
maintain high performance, wash and dry the pre-filter monthly, replacing it every 6 months.
Wash and dry the HEPA filter every 3 months, replacing it every 12 months.
Dustbin and Mesh Filter
1
Press the dustbin release button to remove
the dustbin.
3
Turn counter-clockwise to remove the filters.
5
③
④
②
①
After cleaning, insert the clean pre-filter into
the mesh filter properly and it clicks into
place. Install the clean filter and dustbin
back into the main body, then close the
dustbin flap.
Mesh filter Pre-filter
2
Clean with a damp cloth, taking care to prevent
water entering the appliance main body and battery.
4
Clean the dustbin and mesh filter with a damp cloth.
Air dry completely before reinstalling.
Warning:
Do not wash the dustbin as it contains a dust sensor.
If it comes into contact with water, please dry it with
a hair dryer.
37