Error Indications - Toyota PT546-52120 Manual Del Propietário

Error indications

If the CD player does not work, the CD stops suddenly during playback, or a similar problem occurs, an error
indication will appear on the display. The cause of the trouble will be indicated by an error number, and you
should check the corresponding item shown in the table below.
CD CHECK
ERROR 3
ERROR 4
WAIT
NO SUPPORT
4
When the disc is dirty or has been inserted upside-down.
Check the disc.
There is probably an electrical or mechanical fault in the CD player.
Contact your TOYOTA dealer and ask for repair.
This appears when there is excess current flow.
Contact your TOYOTA dealer and ask for repair.
This appears when the CD player does not work because its temperature is high.
Wait a short while until the vehicle temperature goes down.
This appears when an MP3/WMA file format is unusual and not supported by this unit
like WAV format recordings.
Please check the MP3/WMA file format.