Filter Slide - SCHOTT KL 1500 H Serie Manual Del Usuario

26

2.7 Filter slide

EN
Insert filter
The KL 1500 HAL has a filter slide that can be equipped with an insert filter.
Various filters are available as accessories.
When inserting the filter slide into the cold light source, there are two detent
positions which are signaled by a clicking sound. The filter slide must be in one
of the two end positions or the detent position when operating the light source.
If the filter slide is in an intermediate position, it may damage the light source.
Make sure that the filter slide has cooled down before inserting a filter.
Wear lint-free gloves to load the filter slide.
1. Pull out the filter slide completely and turn it so that the labeling is legible.
2. Insert the insert filter from the top right behind the two retaining lugs
marked in black.
3. Click the insert filter firmly into place by applying slight pressure at the top
right. The filter now lies flat in the holder.