Expondo ulsonix USX-ST1 Manual De Instrucciones página 26

3. Connect the unit to the power supply. Switch on with the I/O button in the
"I" position.
4. Use the steam level selection button to set the preferred level.
5. The unit will begin to heat up and will be ready for use after approx. 60s.
6. Filling the tank with water while the unit is switched on is prohibited. To refill
the tank, switch off the unit and let it cool down to avoid skin contact with
hot steam and heated parts,
7. To turn off the machine, set the I/O button to the "O" position and
disconnect from the power source.
8. After use and after waiting for the machine to cool down, always empty the
water tank to avoid limescale deposits.
INSTRUCTIONS FOR USE
Steam ironing should begin with a test on a small area of fabric in the least
•
conspicuous place.
Adding detergents, fragrances, etc. to the water in the tank is prohibited. This
•
can damage the machine.
Avoid kinks in the steam hose.
•
• Before ironing, always try to straighten the garment on the hanger as much
as possible by hand.
• Depending on the garment to be ironed, use vertical or horizontal
movements. Follow the clothing manufacturer's recommendations.
Thick fabrics will require a longer ironing time.
•