Technical Data; Intended Use; Safety Information; Storage, Cleaning - LIVARNO home 366965 2010 Instrucciones De Montaje

Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following assembly
instructions and the safety
information carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Package contents (Fig. A)
1 x table, disassembled, large (1–4)
1 x table, disassembled, medium (5–8)
1 x table, disassembled, small (9–12)
12 x screw, long (a)
12 x screw, short (b)
12 x felt glider pad (c)
1 x hex key (d)
1 x assembly instructions

Technical data

Dimensions (large table):
approx. 50 x 39.5 x 42cm (W x H x D)
Dimensions (medium table):
approx. 42 x 35 x 42cm (W x H x D)
Dimensions (small table):
approx. 34 x 30 x 42cm (W x H x D)
Maximum load (per table): 5kg
Date of manufacture (month/year):
05/2021

Intended use

The product is designed as a table set for
indoors. The product is intended for private use
only and not for commercial use.

Safety information

Life-threatening hazard!
• Never leave children unattended with the pack-
aging materials. There is a risk of suffocation.
Risk of injury!
• Ensure the product is properly stabilised
before using it.
• Place the product on a level surface.
• The product may only be used under adult
supervision and must not be used as a toy.
• The product is not a toy or a climbing appa-
ratus! Ensure that persons, especially children,
do not pull themselves up on or sit on the
product. The product can tip over.
• Check the product for damage or wear
before each use. Only use the product if it is in
perfect condition!
• Ensure that the product has been assembled
properly and in accordance with these assem-
bly instructions. Improper assembly can lead
to injuries and impair the product's safety and
functionality.
• Never stand on the product.
Assembly
To assemble the product you require a cross-
head screwdriver (not included in the package
contents).
1. Place the table tops (4/8/12) on a smooth,
soft and clean surface, with the underside
facing upwards. (Warning! Hard surfaces can
scratch the product.) (Fig. B).
2. Slide one leg (2/6/10) under the respective
table top and attach it with the screws (b)
(Fig. B).
3. Attach the other leg (3/7/11) (Fig. C).
4. Attach the crossbars (1/5/9) with the screws
(a) and the hex key (c) (Fig. D).
5. Affix the felt glider pads (c) under the legs to
protect the floor against any scratches.
6. Place the set on a level surface (Fig. E).

Storage, cleaning

When not in use, always store the product
clean and dry at room temperature. Only clean
the product with a damp cloth and wipe dry
afterwards.
IMPORTANT! Never clean the product with
harsh cleaning agents.
GB/IE 9