En Original Instructions; Declaration Of Conformity; Specified Use; General Safety Instructions - Metabo RWE 1200 Manual Original

en ENGLISH
Original Instructions

1. Declaration of Conformity

We, being solely responsible: Hereby declare that
these stirrers, identified by type and serial number
*1), meet all relevant requirements of directives *2)
and standards *3). Technical documents for *4) -
see page 3.
For UK only:
We as manufacturer and authorized person to
compile the technical file, see *4) on page 3,
hereby declare under sole responsibility that these
stirrers, identified by type and serial number *1) on
page 3 of the Original Instructions, fulfil all relevant
provisions of following UK Regulations S.I. 2016/
1091, S.I. 2008/1597, S.I. 2012/3032 and Desig-
nated Standards *3) on page 3.

2. Specified Use

The stirrer is intended for stirring of powdery
building materials such as mortar, plaster, adhesive
as well as solvent-free paints, lacquer and similar
substances.
Do not use for drilling.
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.

3. General Safety Instructions

For your own protection and for the
protection of your electrical tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Reading the operating instruc-
tions will reduce the risk of injury.
WARNING – Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference. Pass on your electrical tool only
together with these documents.

4. Special Safety Instructions

a) Hold the tool with both hands at the intended
handles. Loss of control can cause personal
injury.
b) Ensure sufficient ventilation when mixing
flammable materials to avoid a hazardous
atmosphere. Developing vapour may be inhaled or
be ignited by the sparks the power tool produces.
c) Do not mix food. Power tools and their
accessories are not designed for processing food.
8
d) Keep the cord away from the working area.
The cord may be entangled by the mixer basket.
e) Ensure that the mixing container is placed in
a firm and secure position. A container that is not
properly secured may move unexpectedly.
f) Ensure that no liquid splashes against the
housing of the power tool. Liquid that has
penetrated the power tool can cause damage and
lead to electric shock.
g) Follow the instructions and warnings for the
material to be mixed. Material to be mixed may be
harmful.
h) If the power tool falls into the material to be
mixed, unplug the tool immediately and have
the power tool checked by a qualified repair
person. Reaching into the bucket with the tool still
plugged in can lead to electric shock.
i) Do not reach into the mixing container with
your hands or insert any other objects into it
while mixing. Contact with the stirrer basket may
lead to serious personal injury.
j) Start up and run down the tool in the mixing
container only. The mixer basket may bend or spin
in an uncontrolled manner.
Additional Safety Instructions:
Hold the power tool by the insulated gripping
surfaces when performing an operation where
the cutting accessory may contact hidden
wiring or its own cord. Cutting accessory
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
Observe the maximum permitted agitator paddle
diameter (see technical data).
There will be reverse torque at the handle. Always
hold the machine with both hands on the intended
handles, take a secure stance and concentrate on
the work.
Secure the stirring container against turning.
Always wear protective goggles, gloves, and a
breathing mask when working with the machine.
Wear ear protectors when working for long periods
of time. High noise levels over a prolonged period of
time may affect your hearing.
Keep hands away from the rotating tool!
Do not mix solvents or materials containing solvents
with a flashpoint below 21°C. Hazardous vapours or
explosive mixtures may form during processing.
Reducing dust exposure:
WARNING - Some dust created by power
sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
- Lead from lead-based paints,
- Crystalline silica from bricks and cement and
other masonry products, and