3.4. Preparations for operation
CAUTION! Always turn off the appliance before opening the housing. This will
prevent electric shock and operating malfunctions.
1) Install the appliance away from direct sunlight. Keep at least 40 cm of distance
between the soap dispenser underside and the nearest obstacle, or the
appliance may not work properly.
2) This product can be powered in either of two voltage sources:
•
4 x size AA batteries
Power adapter
•
Installing the batteries
Insert the key into the lock at the top of the soap dispenser and turn the lock to
open the housing. Pull away the battery compartment lid tabs and remove the lid.
Install 4 size AA 1.5 V batteries according to the polarity indications displayed inside
the compartment and on the batteries.