Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The terms "device" or "product" are used in the warnings and instructions to refer to
HOT AIR WELDING GUN
<
2.1.
Electrical safety
a)
The plug must fit the socket. Do not modify the plug in any way. Using original
plugs and matching sockets reduces the risk of electric shock.
b)
Do not touch the device with wet or damp hands.
c)
Use the cable only for its designated use. Never use it to carry the device or to
pull the plug out of a socket. Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables increase the risk of electric
shock.
d)
If working with the device outdoors, make sure to use an extension cord
suitable for outdoor use. Using an extension cord suitable for outdoor use
reduces the risk of electric shock.
e)
Do not use the device if the power cord is damaged or shows obvious signs of
wear. A damaged power cord should be replaced by a qualified electrician or
the manufacturer's service centre.
f)
To avoid electric shock, do not immerse the cord, plug or device in water or
other liquids. Do not use the device on wet surfaces.
g)
ATTENTION! DANGER TO LIFE! While cleaning, never immerse the device in
water or other liquids.
h)
Do not use in very humid environments or in the direct vicinity of water tanks.
i)
Prevent the device from getting wet. Risk of electric shock!
2.2.
Safety in the workplace
a)
Make sure the workplace is clean and well lit. A messy or poorly lit workplace
may lead to accidents. Try to think ahead, observe what is going on and use
common sense when working with the device.
b)
Do not use the device in a potentially explosive environment, for example in
the presence of flammable liquids, gases or dust.
c)
If you are unsure about whether the product is operating correctly or if you
find damage, please contact the manufacturer's service centre.
d)
Only the manufacturer's service centre may make repairs to the product. Do
not attempt to make repairs yourself!
e)
In case of fire, use a powder or carbon dioxide (CO2) fire extinguisher (one
intended for use on live electrical devices) to put it out.
f)
Use the device in a well-ventilated space.
>.
Publicidad
Tabla de contenido
