Guide For Initial Operation - KingSmith WalkingPad WPP1F Manual Del Usuario

1.3 Guide for initial operation

1. Choose flat ground to place the 2. Unfold the walkingpad slowly and
WalkingPad. It is forbidden to place it press it down to completely flat.
on thick and soft cushion. Please note:
Don't connect the power before the
WalkingPad is fully unfolded.
4. Connect the power cord and 5. Unlock all Functions by following
press the button to switch on. two ways, otherwise the speed limit
remains at 3km/hr (1.75mi/hr):
1) Walk 1km (0.6mi) on device first,
reboot to unlock all functions.
2) Complete Novice Guide by "KS Fit"
APP to unlock all functions.
07
3. Check and adjust the walking belt to
make sure it's centered.
KS Fit
6. Search ''KS Fit" App from Apple Store
or Google Play and complete
installation.
7. Open the App, follow the prompts 8. Enter novice guide to unlock all
to set up the device. functions.
10. If the belt deviates from the orbit in 11. Short press: return to the previous mode.
use, please adjust properly. Long press: switch to Standby mode.
SEE: 06 Maintenance and service.
KS Fit
9. Start to use the WalkingPad.
Mode Switch
08