Wireless Connection - FONRI GS558D-H04 Guia Del Usuario

Testing the Smoke Sensor:
Test every smoke sensor in your home to make sure it is installed and working properly.
1. Using flame to test the sensor may result
in injury and/or property damage.
2. Test the sensor on a weekly basis and
after extended periods of absence, such
as vacation returns.
Press the test button firmly for 5 seconds. The alarm will sound 3 short beeps, then pauses
for 1.5 seconds and this pattern will continue until you release the button. An alarm may
sound for a few seconds after releasing the button.
DANGER: If an alarm sounds in a non-test condition, this means that the sensor is able to
detect smoke. The alarm means that you need to take the necessary precautions for the
situation immediately.

Wireless Connection:

Wireless Network Frequency:
Wireless Transmission Current:
Wireless Network Distance:
Adding devices using the Fonri WiFi app:
Click the "+" sign in the upper right corner of the app screen.
Add your device by selecting the "Sensors" tab from the left menu, then "Smoke Sensor"
and follow the instructions in the app.
3. Stay at arm's length from the sensor whi-
le testing. You can perform the test by
following the steps below:
2.4 GHz Wi-Fi
< 450mA
> 30 metre
7