Exhaust Ducting Guide; Switching The Door Position - Samsung DV25B6900H Serie Manual Del Usuario

Installation

Exhaust ducting guide

Ducting
1. Make sure the dryer is installed properly so the air exhausts freely.
2. Use 4-inch rigid metal ducts. Tape all joints including the dryer connection. Never use lint-trapping
screws.
3. To facilitate the exhaust, keep the ducts as straight as possible.
Cleaning
Clean all old ducts before installing the dryer, and make sure the vent flap opens and closes freely. We
recommend that you clean the exhaust system annually or on a regular basis.
WARNING
• To prevent fire, do not use plastic, thin-foil, or non-metal flexible ducts of any kind.
• Do not use a poor exhaust system because it slows down the dryer's performance.
• Do not use excessively long ducts that have multiple elbows.
• Do not use crushed or clogged venting or ducts.

Switching the door position

32 English
DV6900B_SimpleUX_WEB_Heatpump_EN.indd 32
To reverse the direction of the door, we recommend that
you contact a qualified technician.
1. Unplug the power cord of the dryer.
2. Remove the two hinge screws from the door, and
then remove the door by lifting it up slightly.
2022/6/23 16:28:04