Lindy 39381 Manual De Usuario página 4

User Manual
Specification
HDMI 1.4, 10.2Gbps compliant

HDCP 2.2/1.4 Pass-through

HDMI Audio formats: LPCM 2/5.1/7.1Ch, Dolby Digital 2/5.1Ch, DTS 2/5.1Ch, DTS 96/245.1Ch

Transmitter Ports
Input:
HDMI Type A (Female)

USB Type A (Female)

Output:
RJ-45 (Female)

HDMI Type A (Female)

Operating Temperature: -5°C - 55°C (23°F - 131°F)

Storage Temperature: -25°C - 70°C (-13°F - 158°F)

Relative Humidity: 10 - 90% RH (Non-condensing)

Metal Housing

Colour: Black

Power Requirements: AC100-240V 50/60Hz

Power Consumption: 4.5W

Installation and Operation
Transmitter Front and Rear
1. HDMI Out: Connect to an HDMI local display.
2. HDMI In: Connect to an HDMI source device.
3. USB Host: Connect to a USB source device using the USB Type A - A cable included (LED illuminates
when an active USB source is detected).
4. DC 12V: Connect the 12VDC 1A PSU to an AC wall outlet and securely connector to the Transmitter
or Receiver. This is only required at one side of the installation.
5. RESET: Press the button to reboot the Transmitter.
6. CAT OUT: Connect the Receiver using a single Cat.6 or above cable for all data signals. Please do
not connect to a network port.
7. Status LED: Illuminates when a valid HDMI signal input is detected.
Receiver Ports
Input:
RJ-45 (Female)

Output:
HDMI Type A (Female)

2x USB Type A (Female)

English