EAS ELECTRIC EMC1856W2 Manual De Instrucciones página 34

3.2 FUNCTIONS
1. Model A
1) Key
A) Setting key (Temperature setting button of refrigerator compartment).
2) Display screen
LED 1 - Setting 1: 6ºC
LED 2 - Setting 2: 4ºC
Once initially powered on, the display screen is on full display for 3s and then the
refrigerator runs according to setting 2 (4ºC).
In case of a failure, the corresponding LED blinks.
In case of no failures, it shows the actual temperature setting of the refrigerator.
Fault code
LED①
LED③
LED④
3) Temperature setting
Each time the temperature setting button A is pressed once, the temperature
setting changes one time. After the temperature setting has been completed, the
refrigerator will run according to the set value after 30s.
The shift regulation is:
setting 1 (6ºC)
4) Super freeze mode
Long press temperature setting key for 3s, after the LED 2 and LED 3 lighting for 30s,
it will enter into Super freeze mode.
Long press temperature setting key for 3 s could cancel Super freeze mode.
1. Model B
④
③
A
setting 2 (4ºC)
 Turn the temperature control knob to MAX, the internal
temperature of the refrigerator becomes lower.
Turn the temperature control knob to MIN, the internal

temperature of the refrigerator becomes higher.
 Please adjust the temperature between "MAX" and "MIN".
②
①
LED 3 - Setting 3: 3ºC
LED 4 - Setting 4: 2ºC
Fault description
Ambient temperature sensor
Refrigerator defrost sensor
Refrigerator temperature
sensor circuit
setting 3 (3ºC) setting 4 (2ºC)
15 V.2