Cleaning The Filters - essentiel b EMA 108 QUICK POWER Instrucciones De Uso

4
3
Fig. 9
Empty the contents of the dust container into the bin.
Remove the Hepa filter (5) (Fig. 10) from the filter unit by pulling on the tab (3) and
turning it slightly anti-clockwise towards the symbol (unlocked) to extract it (Fig.
10).
5
3
Fig 10
CLEANING THE DUST CONTAINER
Wash the container with a soft sponge and warm water; let it dry completely before
putting it back on the vacuum cleaner (to prevent water from being sucked into the
electrical components).

Cleaning the filters

Tap the Hepa filter against a bin to clean the ridges and/or vacuum the excess dust with
a vacuum cleaner. Caution: do not rub the filter. You could damage it.
Clean the Hepa filter with water only if it is very dirty.
Rinse the filter unit with clean water. Allow both parts to dry completely (24 hours
minimum for the Hepa filter) before replacing them correctly on the appliance
(see Fig. 11).
20