Bluetooth Operation - Grundig Connect 360 Manual De Usuario

BLUETOOTH OPERATION

For best Bluetooth performance, make
sure your Bluetooth device and your
speaker are in open area and within
30m (broadcast mode will be Max.
20m). Keep other wireless equipment at
least 1 m away from your speaker.
• Press and hold the " " button 3
seconds to turn on the Speaker, a
prompt tones will sound. The speaker
will automatically connect last pairing
device or start Bluetooth searching
mode, and the White LED flashes in
each 0.5 seconds once.
• Activate your Bluetooth device and
select the search mode (refer to your
device's manual when necessary)
• Select "Grundig Connect 360" in the
pairing list.
• If pairing is successful, a prompt tones
will sound, and White LED will light on.
• Now, you can start to play music from
the connected device.
• To disconnect the Bluetooth function,
you can disable the function from your
Bluetooth device or press "BT" button
on the unit.
Note:
• For saving battery energy, the Speaker
will turn to off mode automatically when
no device is in paired or no playback in
15 minutes.
• Enter "0000" for the password if
necessary.
• The speaker will also be disconnected
when your device is moved beyond the
operational range.
• If you want to reconnect your device
to this speaker, place it within the
operational range.
• If the device is moved beyond the
operational range, when it is brought
back, please check if the device is still
connected to the speaker.
• If the connection is lost, follow the
instructions above to pair your device to
the speaker again.
• When powered on, your speaker will
try to reconnect recently connected
devices.
ENGLISH 39