Care And Maintenance; Software Updates - Gallagher W-0 Guia Del Usuario

Ocultar thumbs Ver también para W-0:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
Gallagher W- Weigh Scale User Guide
Zero Tracking
During a weigh session, small amounts of debris such as mud or dung can
accumulate on the weighing pla orm. A er each animal leaves the pla orm, the
scale compensates for the small amount of debris le by automa cally zeroing the
weight.
If the accumulated weight of the debris is more than the scales zero tracking range,
zero tracking will not work and the
Zero
>0<
bu on.
Note: Zero tracking is enabled for Auto and Manual modes but disabled in Fine
mode.

CARE AND MAINTENANCE

The W-0 is a tough and reliable product designed for use in typical livestock
environments. Proper care and maintenance can extend its life.
Listed below are guidelines for keeping the W-0 in good condi on.
Do not expose the W-0 to excessive temperatures or fi re. (Below -20
o
above +70
Do not submerge the W-0 in any liquid.
Store in a cool, dry place. Avoid storing in direct sunlight.
A er use, clean with a damp cloth. Take care not to scratch the display.
If storing the W-0 for a long me, store with the ba ery fully charged.
If ba ery fl uid comes in contact with:
Eyes - fl ush the aff ected area with water for at least 15 minutes. Ensure
adequate fl ushing by separa ng the eyelids with fi ngers. Call a physician.
Skin - immediately fl ush with water and/or soap.
This Weigh Scale contains a Lithium ba ery which is not user replaceable. The
lithium ba ery must be replaced by a trained professional using a Gallagher
approved ba ery. Return the unit to a Gallagher Authorised Service Centre for
ba ery replacement.

Software Updates

It is important to update the W-0 so ware from me to me to ensure you
have the latest enhancements.
Updates are regularly released to enhance the features of the scale or to correct
issues.
1.
From the Weighing screen, tap
2.
Select
3.
Follow the instruc ons on the screen to complete the upgrade.
Zero
C).
Upgrade
under W-0.
icon will fl ash. To restore zero, press the
Se ngs
(top right of screen).
o
C or
11

Publicidad

Tabla de contenido
loading

Tabla de contenido