Technical Data; Intended Use; Operating Controls - KRHÜNER 80796 Manual De Instrucciones

2. HOW TO USE

TECHNICAL DATA

• Rated voltage: 3.6V DC
• No-load speed: 200 rpm
• Chuck size: 1/4 inches
• Batt ery capacity: 1300mAh (LI-ION)
• Charging ti me: 4 hours

INTENDED USE

The electric screwdriver is
suitable for the inserti on and
removal of screws.

OPERATING CONTROLS

1. Bit holder (chuck)
2. Torque setti ng
3. Switch trigger
4. Reversing block
5. Batt ery indicator
6. Butt on for handle rotati on
7. LED light
8. Charging port
BEFORE USE: CHARGING
• The batt ery charger supplied matches to the batt ery installed in the machine. Do not
use other batt ery chargers.
• The Li-ion batt ery is protected against deep discharging. When the batt ery is empty,
the machine is switched off by means of a protecti ve circuit: the bit holder no longer
moves.
If the On/Off switch is subject to conti nued use, the batt ery can be damaged.
The charging process starts as soon as the mains plug of the batt ery charger (6) is insert-
ed in the socket and the machine is then connected to the batt ery charger.
The batt ery charge indicator (5) lights up red to indicate the charging procedure. The