Signal Search - Black Diamond Equipment RECON LT Manual De Instrucciones

Point of impact
Point of disappearance
Primary
Search area

4.8.2 Signal search

Start searching in the primary search area for the initial signal detection as well as for visual/acoustic signals. The
BLACK DIAMOND RECON LT has a circular receiving range that allows a correct indication of direction and distance
from the point of initial signal detection – a specific method such as turning/rotating is not necessary. All signals
of the burials that are within the maximum receiving range are received simultaneously.
Walk the search strip width in the search
area quickly. The recommended search strip
width for the BLACK DIAMOND RECON LT is
50 m. The display shows "no signal".
One rescuer with skis
for signal search
d = search strip width
NOTICE All participants, observers included, must switch their devices to search mode (or to standby
mode)! Also follow the external interference distance recommendations!
Manual BLACK DIAMOND RECON LT
SIGNAL SEARCH
Result Accuracy
One rescuer by foot
for signal search
COARSE SEARCH
FINE SEARCH
More rescuers
for signal search
PINPOINTING
Search Speed
7 / 21