Tabla De Contenido - Airzone Aidoo Z-Wave Plus AZAI6ZW Serie Manual

Content
ENVIRONMENTAL POLICY _________________________________________________________________________ 3
BEFORE STARTING__________________________________________________________________________________ 4
EN
AIDOO Z-WAVE PLUS BY AIRZONE ______________________________________________________________ 5
>
>
ASSEMBLY AND CONNECTION ___________________________________________________________________ 7
>
>
>
CONFIGURATION ____________________________________________________________________________________ 9
>
>
>
Z-WAVE COMMUNICATION ________________________________________________________________________ 10
>
>
>
>
Device elements __________________________________________________________________________ 5
Technical specs ___________________________________________________________________________ 6
Assembly __________________________________________________________________________________ 7
Connection _________________________________________________________________________________ 7
Self-diagnosis _____________________________________________________________________________ 8
Add/Remove Aidoo Z-Wave Plus into a Z-Wave network (classic) _____________ 9
>
Standard Inclusion _________________________________________________________________ 9
>
Standard exclusion _________________________________________________________________ 9
SmartStart Inclusion _____________________________________________________________________ 9
S2 Secure inclusion ______________________________________________________________________ 10
Supported Command classes __________________________________________________________ 10
>
Supporting command class basic _______________________________________________ 11
>
Supporting command class indicator ___________________________________________ 11
>
Notification Command Class _____________________________________________________ 11
>
Associations _________________________________________________________________________ 11
Device control. Z-Wave application command class mapping ___________________ 12
Reset to the factory settings ___________________________________________________________ 13
Firmware Update _________________________________________________________________________ 13