KAISDA K2 Manual De Instrucciones página 9

6. Saddle installation
6.1. Open the package, take out the seat cushion and seat rod, and then install the
rear reflector lamp on the seat rod.
6.2 Insert the seat rod into the frame.
6.3 Adjust the seat position to the height most suitable for your riding position, and
lock the quick release (please make sure the quick release lock is tight).
7. Adjust angle of brake lever, meter, gear shifter and louder controller
on handle bar, then tighten them with tools.
8. Remove the battery
8.1 First open the folding handle safety buckle.
8.2 Then open the folding device.
8.3 Folding the frame, turn the key which on the battery clockwise turn 3 times after
5.1
-4-
6.3
-6-