Oster GCSTGS7000-013 Manual De Instrucciones página 11

ASSEMBLING THE GARMENT STEAMER
1. Remove all parts from the packaging.
2. Remove any plastic bags and labels from the unit.
3. Place the unit on the ground seated on its wheels.
4. Make sure the bottom clips are forward to the switch, place the rod into the rod receptacle on
the unit. Make sure the rod lock nut is loose. Turn it to the left to loosen it. (FIG 1)
5. Once the bar is inserted, tighten the bar lock nut by turning it clockwise until the bar is firmly
locked in place.
6. Open the 2 latches and extend the bar to its full height. Lock the bar in place and close the
latches again.
7. Open hanger arms and tighten up the screwcap to the pole. (FIG 2)
8. Place hanger assembly to pole. (FIG 3)
9. Place clips onto hanger. (FIG 4)
10. Hose connector is designed with clips, insert the hose connector into the receptacle until get a
"click", slightly pull to verify it is in place.
11. Adjust the hook on the shaft of the latches until it locks the bars in place.
12. Place the nozzle on the nozzle holder.
13. The unit is now assembled.
Note: The appliance provided extra clip on the bottom of pole. Pull and turn the knob for use.( FIG 5)
FIG 1
FIG 4
GCSTGS7000_22SEM4 (LA).indd 4 GCSTGS7000_22SEM4 (LA).indd 4
FIG 2
FIG 5
English - 4
FIG 3
FIG 3
2022/3/28 下午4:45 2022/3/28 下午4:45