Care And Maintenance - Nexgrill 720-0905CA Manual De Instrucciones

STAINLESS STEEL
There are many different stainless steel cleaners available.
Always use the mildest cleaning procedure first, scrubbing in
the direction of the grain. Do not use steel wool as it will
scratch the surface. To touch up noticeable scratches in the
stainless steel, sand very lightly with dry 100 grit emery paper
in the direction of the grain. Specks of grease can gather on
the surfaces of the stainless steel and bake on to the surface
and give the appearance of rust. For removal use a mild
abrasive pad in conjunction with a stainless steel cleaner.
GRILL GRATE
All cleaning and maintenance should be done when the grill is
cool and with the fuel supply disconnected.
Do NOT clean any grill part in a self-cleaning oven. The
extreme heat will damage the finish.
ENSURE THAT THE GAS SUPPLY AND THE KNOBS ARE
IN THE "OFF" POSITION. MAKE SURE THE RANGE TOP
BURNER IS COOL BEFORE REMOVAL.
GRILL BURNERS
Extreme care should be taken when moving a burner as it
must be correctly centered on the orifice before any attempt is
made to relight the grill. Frequency of cleaning will depend on
how often you use the grill.
MAIN GRILL BURNER CLEANING
Ensure the gas supply is off and the knobs are in the "OFF"
position. Make sure the grill is cool. Clean the exterior of the
burner with a wire brush. Clear stubborn scale with a metal
scraper. Clear any clogged ports with a straightened paper
clip. Never use a wooden toothpick as it may break off and
clog the port. Please note if insects or other obstructions are
blocking the flow of gas through the burner, and if so you will
need to send mail to our customer service:
ServiceDK@nexgrill.com.
GREASE TRAY CLEANING
The grease tray should be emptied and wiped down
periodically and wash with a mild detergent and warm water
solution. A small amount of sand may be placed in bottom of
grease tray to absorb the grease. Check the grease tray
frequently, do not allow excess grease to accumulate and
overflow out of the grease tray.
BURNER CLEANING
1. Turn off the gas supply, and make sure all the knobs
are in the "OFF" position.
2. Wait for the grill to cool.
3. Clean the exterior of the burner with a wire brush. Use
a metal scraper to stubborn stains.
4. Clear clogged port with a straightened paper clip.
Never use a wooden toothpick as it may break off and
clog the port.
5. If inserts or other obstructions are blocking the flow of
gas through the burner, send mail to our customer
service: ServiceDK@nexgrill.com.

Care and Maintenance

10
Warning: If you wish to replace main burner, we
strongly recommend that you hire a
professionally trained technician to replace it.
Please understand that we will not be responsible
for any liability, personal injury, or property
damage resulting from an improperly assembled
burner.