Dimensions; Scope Of Delivery; Accessories - Wilo Port 800 Instrucciones De Instalación Y Funcionamiento

PRODUCT DESCRIPTION

3.8. Dimensions

Fig. 2: Dimension drawing
ø880
110
120
120
The height dimensions increase by the upward protruding part of
the selected pump cover.

3.9. Scope of delivery

• Pump chamber with complete pipework, consisting of
• Discharge pipe with surface coupling, 90° non-return ball valve
and pressure connection
• Shut-off device
• Cross member
• Chain (lifting equipment for pump installation)
• Installation materials for pumps
• Installation and operating instructions
NOTE:
For use as a pumping station, accessories are required that have to
be ordered separately.

3.10. Accessories

• Clamp bolting for connection to a PE discharge pipe
• Pump chamber extension
• Pump cover in classes A15, B125 or D400 (in accordance with
EN 124)
• Operating crank for shut-off device
• Flush connection with Storz C connection
• Flush connection extension
• Vacuum relief valve
• Level control using:
• Dynamic pressure bell, optionally with bubbling-through system
• Level sensor
• Float switch
• Macerator pump
• Switchgear (depending on level control device)
• Ex cut-off relay and Zener barrier as separate accessories for con-
nection of float switch or level sensor in potentially explosive areas
• Alarm switchgear
• Flash light
For further information, see catalogue.
Installation and operating instructions Wilo-Port 800
120
100
ø900
ø820
Fig. 2
ø880
110
120
100
120
English
ø820
ø900
120
39