HQ P.SUP.SMP60- Manual De Usuario página 3

PLEASE NOTE: MAKE SURE THE CORRECT POLARITY IS USED
WITH YOUR EQUIPMENT, WRONG POLARITY WILL DAMAGE
YOUR EQUIPMENT. IF YOU ARE UNSURE, NEVER TRY TO
CONNECT IT. CONSULT WITH YOUR LOCAL DEALER!
3. Set the DC voltage selector at the desired voltage position. (5V/6V/
7.5V/9V/12V at 5A or 13.5V/15V at 4A ).
4. Make sure the total loading does not exceed the rated output current
of the power supply.
5. Connect the power cord to the power supply fi rst and then insert AC
plug into your wall socket. The LED indicator will light instantly.
6. Switch on your appliance.
7. Please note: The LED indicator will come on and stay on only when
set on any voltage.
CAUTION:
1. Do not short circuit the output terminals.
2. Ensure correct voltage is used as continuous excess voltage could
damage your equipment.
3. Do not try to use this power supply with appliance requiring more
than 5Amp for 5-12V or 4Amp for 13.5V and 15V (60 watts max.).
4. Do not attempt to open this unit.
5. Remove from mains socket when not in use.
6. If the supply cord of this power supply is damaged, the power supply
should be returned to the manufacturer or his agent for the cord to
be replaced.
7. This power supply must be earthed.
3